Ahmedabad, India Composites & advanced manufacturing

Solid Structural Profiles

Carbon Fibre Rods

TAKSA Industries supplies high-density solid carbon fibre rods engineered for extreme axial tensile strength, linear stiffness, and corrosion resistance. Ideal for wing spars, structural reinforcement pins, pushrods, and non-conductive/low-inertia machine guide bars.

Get a Quote for Carbon Rods
Solid carbon fibre round bars and rods in multiple diameters
Solid carbon fibre round rods arranged alongside micrometer inspection tools.

Technical Specifications (Diameter × Length)

Standard solid rod dimensions are listed below. Tight-tolerance centerless ground rods and custom lengths are confirmed after technical review.

Parameter Standard Range / Value Manufacturing Process Tolerance / Verification
Outer Diameter (D) 2 mm to 50 mm (Larger up to 150 mm on request) Pultruded / Moulded Solid Rod Confirmed after technical review
Standard Length (L) Up to 2000 mm continuous Precision Abrasive Cut-to-Length ± 0.5 mm cut length tolerance
Fibre Architecture Unidirectional (UD) Axial Core or 3K Wrapped High Fibre-Volume Epoxy Matrix Maximized for axial & bending loads
Surface Finish Smooth Pultruded, Centerless Ground, or 3K Twill Post-Cure Surface Finishing Ground finish ready for bearing/bush fit
Grade Options Economical, General Engineering, High Modulus Standard to Aerospace-Grade Tow Selected per stiffness requirement

Customization & End-Machining

Centerless Grinding for Bearing Fits

Rods that slide inside linear bushings or mate into precision-reamed sockets can be centerless ground to tight outer diameter tolerances with a micro-textured bonding surface.

Precision Cut Lengths & Chamfers

We supply rods pre-cut to your exact production lengths with 45° end chamfers so they insert smoothly into adhesive sockets or metal clevises without fibre fraying.

Bonded Threaded Studs & End Caps

Because cutting external threads directly into unidirectional carbon fibres reduces strength, we can bond CNC-machined aluminium or stainless steel threaded end-fittings directly onto the rod ends.

Typical Engineering Applications

  • Fixed-Wing UAV Spars & Pushrods: High bending-stiffness main wing joiners and control surface pushrods that resist buckling under aerodynamic loads.
  • Robotic Linear Linkages & Tie Rods: Lightweight parallel-kinematic delta robot links and structural tension ties.
  • Industrial Guide Bars & Alignment Pins: Corrosion-free, low-thermal-expansion locating dowels and sensor guide rails.
  • Structural Composite Reinforcement: Internal strengthening rods embedded into moulded structures, marine hulls, and sporting equipment.
Industrial robotic linkage assembly using carbon fibre rods and brackets
High-stiffness carbon composite profiles integrated into a low-inertia robotic linkage.

Ordering Information & How to Specify

Provide the following details when requesting a quotation for solid carbon fibre rods:

Requirement Item What to Specify Notes
Dimensions Diameter (mm) × Length (mm) Specify if the outer diameter must fit into a specific bore size.
Construction & Grade Unidirectional Pultruded or 3K Woven; Grade level UD is standard for pure bending/tension; 3K wrap resists splitting.
End Preparation Square cut, chamfered ends, or bonded metal fittings Upload a sketch or STEP file if custom end-machining is needed.
Quantity & Lead Time Total pieces or total linear metres required MOQ and dispatch schedule are confirmed after technical review.

Frequently Asked Questions

When should I use a solid rod instead of a round tube?

Use a solid rod when outer space is restricted (typically under 10 mm diameter), when high shear or crush resistance is required at clamping points, or for short structural pins and wing joiners.

Can external threads be machined directly onto a carbon rod?

Direct threading cuts across longitudinal carbon fibres and weakens the joint. For threaded connections, we recommend bonding an internally threaded metal sleeve over the outside of the rod.

What is the difference between pultruded and 3K wrapped rods?

Pultruded rods contain 100% axial unidirectional fibres for maximum bending stiffness and lowest cost. 3K wrapped rods include woven outer layers that prevent longitudinal splitting under cross-drilling or torsion.

Can you cut solid rods into short dowel pins?

Yes. We can wet-cut solid rods into custom pin lengths and chamfer the ends for fast assembly on your production line.

Ready to Specify Your Carbon Fibre Rods?

Send your Diameter × Length dimensions and quantity for a fast technical review.

Get a Quote for Carbon Rods