Box-Section Structural Profiles
Carbon Fibre Square Tubes
TAKSA Industries manufactures hollow square and rectangular carbon fibre tubes designed for structural frames, linear automation gantries, and UAV motor arms where flat mounting faces and zero rotational slip are essential.
Get a Quote for Square Tubes
Technical Specifications (Outer Width × Wall Thickness × Length)
Standard box-profile specifications are outlined below. Custom mandrel sizes and machined mounting patterns are confirmed after technical review.
| Parameter | Standard Range / Value | Construction / Process | Tolerance / Verification |
|---|---|---|---|
| Outer Profile (W × H) | 10 × 10 mm to 100 × 100 mm (Square & Rectangular) | Moulded / Mandrel-Wrapped or Pultruded | Confirmed after technical review |
| Wall Thickness | 1.0 mm to 8.0 mm | Multi-Layer Carbon / Epoxy Laminate | Caliper-verified wall uniformity |
| Standard Length | Up to 2000 mm continuous | CNC Cut-to-Length | ± 0.5 mm cut length tolerance |
| Fibre Architecture | 3K Twill / Plain Outer + Unidirectional Core | 0°/90° & ±45° Layup Options | Prevents corner splitting under bolt load |
| Surface Finish | 3K Twill Matte or Gloss Smooth Flats | Mould-Cured / Cello-Wrapped | Flat faces ready for flush bracket mounting |
Customization & Secondary Machining
3-Axis CNC Face Drilling & Slotting
Flat tube walls allow precision CNC drilling of motor bolt patterns, cable pass-through slots, and access windows without the curved-surface washers required on round tubes.
Square & Rectangular Geometries
Select symmetrical square profiles for uniform bi-directional bending stiffness, or rectangular box sections oriented vertically to resist heavy cantilever beam deflection.
Internal Sleeve & Gusset Bonding
We can fabricate matching CNC-cut carbon gusset plates or internal aluminum/3D-printed corner joiners to assemble complete rigid spaceframes.
Typical Engineering Applications
- High-Speed Automation Gantries: Low-mass crossbeams for pick-and-place robots, laser cutters, and optical inspection systems.
- UAV & VTOL Propulsion Booms: Non-rotating square motor arms that guarantee permanent propeller alignment without heavy clamp blocks.
- Modular Robotics Frames: Easily bolted structural chassis rails for autonomous mobile robots (AMRs) and defence rovers.
- Industrial Test Jigs & Metrology Rigs: Dimensionally stable support beams with near-zero thermal expansion.
Ordering Information & How to Specify
Include the following information when requesting a quote for square or rectangular carbon fibre tubes:
| Requirement Item | What to Specify | Notes |
|---|---|---|
| Profile Dimensions | Outer Width × Outer Height × Wall Thickness × Length (mm) | Also specify internal corner radius if mating with an internal insert. |
| Fastening Method | Through-bolts, external clamping plates, or adhesive bonding | If clamping or through-bolting, let us know so we advise on internal spacers. |
| Machining Drawing | 3D STEP / IGES or 2D dimensioned PDF | Required if holes, slots, or mitred end cuts are needed. |
| Quantity & Lead Time | Prototype pieces or batch quantity | Mandrel availability and lead time are confirmed after technical review. |
Frequently Asked Questions
Why choose square tubes over round tubes?
Square tubes provide flat reference surfaces for mounting motors, linear rails, and sensors directly with flat brackets, eliminating rotational twist Alignment issues common with round clamps.
Can I tighten bolts directly through a hollow square tube?
Tightening a bolt directly across hollow composite walls can crush the tube. We recommend inserting a metal or 3D-printed internal crush-spacer tube around the bolt shaft or using flanged blind rivets/rivnuts.
Are the internal corners of square tubes sharp 90-degree angles?
No. All composite square tubes have a small internal and external corner radius formed by the mandrel and carbon fibres wrapping around the edges. Confirm the exact corner radius during review if designing internal plugs.
Can you machine holes on all four faces of a square tube?
Yes. Using indexed fixtures on our 3-axis CNC router, we can drill and slot any or all four flat faces to match your 3D CAD model.
Ready to Specify Your Carbon Fibre Square Tubes?
Send your Outer Width × Wall Thickness × Length dimensions or upload a STEP drawing for review.
Get a Quote for Square Tubes