Carbon Fibre Round Tubes
TAKSA Industries supplies high-stiffness hollow carbon fibre round tubes engineered for structural booms, robotic arms, industrial rollers, and lightweight framing. Available in both roll-wrapped (multi-axial) and pultruded (unidirectional) constructions to match your bending and torsional load requirements.
Get a Quote for Round Tubes
Technical Specifications (OD × ID × Length)
All round tube enquiries are specified by Outer Diameter (OD), Inner Diameter (ID), and overall Length so our engineering team can confirm wall thickness and mandrel availability.
| Parameter | Standard Specification Range | Notes / Confirmation Basis |
|---|---|---|
| Outer Diameter (OD) | 8 mm to 150 mm | Determined by standard mandrel stock or custom tooling. |
| Inner Diameter (ID) & Wall Thickness | 1.0 mm to 10.0 mm wall thickness (OD − 2×Wall = ID) | Custom wall thicknesses configured per load requirement. |
| Standard Length | Up to 1000 mm and 2000 mm (cut-to-length available) | Longer or spliced assemblies confirmed after technical review. |
| Construction Method | Roll-Wrapped (0°/90° & ±45°) or Pultruded (Unidirectional 0°) | Roll-wrapped recommended for torsion/bolting; pultruded for pure axial bending. |
| Fibre & Matrix System | Standard Modulus Carbon Fibre (3K Exterior Weave / UD Core) with Epoxy Resin | High-modulus or hybrid carbon-glass layups confirmed after technical review. |
| Surface Finish | 3K Plain or Twill Weave (Matte or Gloss) / Raw Cellophane Wrap / Ground Finish | Ground OD finish recommended when bonding into precision metal collars. |
| Dimensional Tolerances | Confirmed after technical review | Dependent on construction method (pultruded vs. roll-wrapped) and post-machining. |
Customization & Secondary Machining
Precision Length Cutting
Tubes cut to exact millimeter lengths using diamond-abrasive tooling to prevent fibre fraying or delamination at the ends.
CNC Drilling & Slotting
Cross-drilled mounting holes, cable pass-through slots, and notched tube ends machined on 3-axis CNC fixtures.
Bonded End Fittings
Installation of CNC-machined aluminium, stainless steel, or 3D-printed nylon inserts and threaded collars using structural epoxy.
Typical Applications
- UAV & Drone Airframes: Multi-rotor motor booms, VTOL wing spars, and payload landing skids.
- Robotics & Automation: Pick-and-place structural links, linear gantry cross-beams, and sensor masts.
- Industrial Machinery: Low-inertia guide rollers, inspection probe extensions, and metrology frames.
- Marine & Defence: Corrosion-resistant telescopic poles, antenna masts, and portable tripod legs.
Ordering Information
| What to Specify in Your Enquiry | 1. Target OD × ID × Length (in mm) 2. Quantity required 3. Application (e.g., bending load, torsional load, or telescoping fit) 4. Any holes, slots, or surface finish preference |
|---|---|
| Minimum Order Quantity (MOQ) | Standard stock diameters can be ordered in prototype quantities; custom mandrel sizes or specialized layups have MOQs confirmed after technical review. |
| Lead Time Confirmation | Lead time is confirmed in your formal quotation based on current mandrel availability, curing schedule, and secondary CNC machining complexity. |
Frequently Asked Questions
Should I choose roll-wrapped or pultruded round tubes?
Choose roll-wrapped tubes if your tube experiences twisting (torsion), clamping forces, or requires drilled bolt holes—the multi-directional wraps prevent splitting. Choose pultruded tubes for straight longitudinal stiffness where fibres run 100% along the length.
Can you supply telescoping tube pairs?
Yes. Let us know if two tubes need to slide or telescope inside one another so we can verify outer and inner diameter clearances during technical review.
Can I drill holes in carbon fibre tubes myself?
While possible with carbide or diamond tooling and proper dust extraction, standard twist drills often delaminate composite walls. We recommend sending a drawing so we can CNC-machine holes cleanly before dispatch.
What file format should I send for machined tubes?
For plain cut tubes, typing OD × ID × Length in the quote form is sufficient. For tubes with holes or slots, upload a .STEP, .IGES, or dimensioned .PDF drawing.